|
Grout
Sika
www.sikausa.com
-
Sikadur 42 Grout Pak -
3-component, 100% solids, moisture-tolerant, epoxy base plate
grouting system.
Data Sheet
MSDS
-
Sikagrout 212 -
non-shrink, cementitious grout with a unique 2-stage shrinkage
compensating mechanism.
Data Sheet
MSDS
Sonneborn
www.Sonneborn.com
-
Sonogrout 10K -
Portland-cement-based, shrinkage-compensated high-strength grout.
Data Sheet
MSDS
-
14K Hy Flow - one-component, cementitious, non-metallic,
shrinkage-compensated, natural-aggregate precision grout.
Data Sheet
MSDS
Patch-n-Repair
Sika
www.sikausa.com
-
Sikatop 111 PLUS two-component, polymer-modified, portland-cement,
fast-setting, screed mortar.
Data Sheet
MSDS
-
Sikatop 122 PLUS two-component, polymer-modified,
Portland-cement, fast-setting, trowel-grade mortar.
Data Sheet
MSDS
-
Sikatop 123 PLUS two-component, polymer-modified, portland
cement, fast-setting, non-sag mortar.
Data Sheet
MSDS
-
Sikatop 144 polymer-modified, 2-component, cementitious
coating.
Data Sheet
MSDS
-
Sikarepair 222 one-component, early strength gaining,
cementitious, patching material for horizontal repair of concrete.
Data Sheet
MSDS
-
Siakrepair 223 one-component, early strength gaining,
cementitious, patching material for vertical and overhead repair of
concrete.
Data Sheet
MSDS
-
Sika Monotop 611 one-component silica fume-enhanced,
polymer-modified, portland-cement mortar.
Data Sheet
MSDS
-
Sika Monotop 615 a one-component, polymer-modified, silca
fume enhanced, cementitious, non-sag mortar.
Data Sheet
MSDS
-
Sikadur 43 Patch Pak 3-component, 100% solids,
moisture-tolerant rapid strength gaining epoxy mortar patching kit.
Data Sheet
MSDS
-
Roadway Patch 2000 1-component, very rapid hardening, early
strength gaining, cementitious, patching material for concrete.
Data Sheet
MSDS
|
Patch and Repair (Cont.)
Tamms
www.tamms.com
-
Speedplug one-component, quick-setting, Portland-cement-based
hydraulic repair mortar that instantly stops running water through
holes or cracks in concrete or masonry.
MSDS
-
Thinpatch polymer modified, cement-based compound, that is
formulated for patching and repairing concrete and masonry from
featheredge to a 1 inch thickness in one application.
MSDS
-
Speed Crete Red Line fast setting, cement-based concrete and
masonry patching compound.
MSDS
-
Tamoseal cement-based, polymer modified material designed to
waterproof concrete and masonry.
MSDS
-
Concrete Finisher Portland cement based damp proofing
coating.
MSDS
Sonneborn
www.sonneborn.com
-
Sonoflow Portland-cement-based, flowable, self-leveling floor
underlayment for uneven, rough, or deteriorated floors.
Data Sheet
MSDS
Thoro
www.thoro.com
-
Thorogrip one-component, waterproof, nonshrinking,
Portland-cement-based anchoring cement that sets hard in 15 minutes.
Data Sheet
MSDS
-
Thorite 400 Architectural low-slump, fast setting,
Portland-cement-based, multi- purpose smooth repair mortar for
detailed fine architectural work.
Data Sheet
MSDS
Ardex
www.ardex.com
-
Ardex Concrete
Dressing - No primers or pre wetting necessary before applied
by trowel or squeegee. Freeze thaw resistant.
Data Sheet
MSDS
-
Ardex Concrete Dressing Fine
Data Sheet
MSDS
-
Ardex Concrete Patch -
trowel-grade
cementitious topping for filling and repairing small areas of
outdoor and indoor concrete above, on or below grade.
Data Sheet
MSDS
-
Ardex Feather Finish - provides a
smooth, permanent finish to a variety of substrates prior to the
installation of today's demanding floor coverings such as sheet
vinyl and VCT.
Data Sheet
MSDS
-
Ardex K15 - Portland cement-based,
high-strength, fast-setting, non-shrink underlayment.
Data Sheet
MSDS
-
Ardex V-900 - is a
self-leveling, non-troweling, Portland cement-based underlayment for
leveling and smoothing interior concrete subfloors on, above or
below grade.
Data Sheet
MSDS
-
Ardex
SD-T - can be used as a new flooring surface, as an
underlayment, or for the repair and renovation of flooring surfaces
in a number of warehouse and light manufacturing environments.
Data Sheet
MSDS
-
Ardex TILT WALL PATCH - is a surface
treatment for filling and smoothing interior and exterior vertical
concrete surfaces prior to sealing or painting.
Data Sheet
MSDS
|
